1. 1.      K. N. Chandran, Y. S. Jeong, R. S. Kumar, J. K. Min, and M. Y. Ha, "Drag reduction through boundary layer analysis on flow over bi-textured thin plates," Fluids Eng. Div. Summer Meet., Paper no. 88124, V001T03A022, 2024.
2. S. Kim, Y. G. Park, S. Y. Yoon, M. Y. Ha, and J. K. Min, "Heat transfer enhancement for gas turbine blade internal cooling with lattice structured rib," Turbo Expo: Power for Land, Sea, and Air, Paper no. 88001, V008T15A007, 2024.
3. J.S. Yang, J.K. Min, C. Yang, K. Jung, “Transient equivalent thermal network model development and numerical study on the natural convection phenomena of a vertical cylinder with multiple baffles in an enclosure for a stacked planar battery,” 17^th International Heat Transfer Conference (IHTC-17), Cape Town, South Africa, August 2023.
4. J.T. Kim, J.S. Yang, S. Park, J.K. Min, “Numerical optimization of a centrifugal fan with splitters considering the efficiency and noise performances,” ASME-JSME-KSME Joint Fluid Engineering Conference 2023 (AJKFED 2023), Osaka, Japan, July, 2023.
5. J.S. Yang, J.K. Min, C. Yang, K. Jung, “A lumped analytical model for thermal management of sodium nickel chloride battery module”, IEEE Electrical Energy Storage Applications and Technologies (EESAT) 2022, Austin, Texas(US) November, 2022
6. A. Mucci, F.K. Kholi, M.Y. Ha, J. Chetwynd-Chatwin, J.K. Min, “Numerical analysis of the phase-change heat transfer inside a pulsating heat pipe with overcritical number of turns,” ASME Turbo Expo 2020, London, England, June 2020.
7. 5.      J.K. Min and J.S. Lee, “The effect of sensitivity analysis on the finite-volume based topology optimization procedure for an aero-thermal system,” PRTEC, Hawaii, USA, 2019.
8.  A. Mucci, F.K. Kholi, M.Y. Ha, J.K. Min, P.A. Beecroft, S.Y. Yoon, W.G. Yun, T. Sibilli, “Transient regime simulation from idle to maximum take-off flight conditions of cooled cooling air heat exchanger for an aero gas turbine heat management,” ASME Turbo Expo 2019, Phoenix, Arizona, USA, June 2019.
9. J.S. Lee and J.K. Min, “A numerical study on the finite-volume based topology optimization for theaero-thermal performance of a fin-shaped structure,” HEFAT 2019, Wicklow, Ireland, 2019.
10. J.S. Lee, M.Y. Ha, J.K. Min, “A numerical study on the topology optimization of a heat sink model for high Reynolds number flow”, TFEC9, Okinawa, Japan, 2017.
11. M. Ryemill and J.K. Min, “The Rolls-Royce plc Ultrafan^TM Heat Management Challenge,” ICAS 2016, Daejon, Korea, Sep. 2016.
12. M. Kim, M.Y. Ha, and J.K. Min, “Numerical study of the high-speed bypass effect on a plate-fin type heat exchanger,” HEFAT2016, Malaga, Spain, Jul. 2016.
13. M. Kim, M.Y. Ha, and J.K. Min, “Full-scale analysis on plate-type heat exchanger using ε-NTU based one-dimensional flow and thermal network model,” ASCHT2016, Busan, Korea, Nov. 2015.
14. M. Kim, Y.J. Kim, J.K. Min, and M.Y. Ha, “A numerical study of plate-fin and pin-fin heat exchanger under   the high Mach number for aero gas-turbine engine,” ASME Turbo Expo 2014, Dusseldorf, Germany, Jun. 2014.
15. J.A. Ko, S.K. Kim, M.Y. Ha, J.K. Min, R. Stieger, S. Mason, J.H. Doo, and C. Son “A study on the installation of the surface air-oil heat exchanger for the application to aero gas-turbine engine,” ISABE2013, Busan, Korea, 2013.
16. J.K. Min and C.-H. Lee, “Numerical analysis on the temperature distribution in the molten sodium-sulfur battery module”, EESAT 2011, San Diego, Oct., 2011.
17. J.H. Doo, S.K. Kim, J.K. Min, J.K. Kim, M.Y. Ha and S. Mason, “Installation Study of Aero-engine Surface Air Oil Heat Exchanger,” 2010 GRDC Symposium, Nov. Seoul, 2010.
18. J.H. Doo, J.K. Min, M.Y. Ha, A. Rolt and R. Stieger, “Performance Prediction of Various Cross-corrugated Primary Surfaces for Intercooler Application in Aero-engine,” 2010 GRDC Symposium, Nov. Seoul, 2010.
19. A.V. Tikhonov, D.N. Ryu, J.K Min, M.H. Cho, “Clear Ice Making in Household Refrigerator: Physical Aspects and Practical Approaches," The 22-nd International Congress of Refrigeration, 2007.
20. L. Yu, J.K. Min, A.V. Tikhonov, D.N. Ryu, "Three-dimensional numerical simulation of the transient heat transfer for ice-making,“ The 3rd Asian Conference on Air Conditioning and Refrigeration, 2006.
21. Y. Shin, A.V. Tikhonov, J.K. Min, K. Seo, & J.S. Lee, "New Evaporator Design to Avoid Frost Blockage,"  The 6-th KSME-JSME Thermal & Fluids Eng. Conf., 2005.
22. J.K. Min, J.G. Lee, Y.S. Shin, M.H. Cho, J.S. Lee & D.C. Choi, "The Design of Air-Flow System in a Refrigerator to Improve the Uniformity of Temperature Distribution," The 6-th KSME-JSME Thermal & Fluids Eng. Conf., 2005.
23. J.K. Min and D.H. Choi, "Analysis of the Film Flow near the Stagnation Point on a Horizontal Tube," Proc. of the 4th KSME-JSME Fluids Eng. Conf., pp. 393-396, 1998.
24. J.K. Min and Kwon, J.H., "Upwinding Finite Element for Transport Problems with Large Convection," Proc. of the 7-th Int. Conf. On Num. Meth. In Laminar and Turbulent Flow, Vol.VII, pp.523-533, Stanford, CA, July, 1991.
25. J.K. Min and Kwon, J.H., "Upwind Finite Element for Transport Problems with Large Convection using Optimal Weighting Function," Proc. of the 2nd KSME-JSME Conf., pp. 153-159, 1990.